|
The LS-80 LED System is a great all-in-one par can system for any mobile entertainer. This popular American DJ lighting system features four LED par cans; one red, one green, one blue and one amber. Each par can uses 12x 1-Watt LEDs producing bright color washes of light. Each par can is rated at a extremely long 50,000 hour life.
The LS-80 LED System uses two T20F chase/foot control system. Users can operate this easy-to-use chase controller directly on from T20F controller or with the foot switch. The T20F features: 20 built-in programs - 10 normal chase programs and 10 chase programs with fade time, 7 pre-set scenes, black out, plus master/slave and DMX operation.
Great for any performer on the go, the LS-80 LED System is easy to set-up and take down. Plus, with low heat emitting LEDs performers stay cooler on stage.
System includes:
• 4x Par 38 polish Par Cans (1x Red, 1x Green, 1x Blue, 1x Amber)
• 1x T20F Chase Controller system with foot control
• 1x Light Stand (extends up to 10 feet/3M)
Par Can Specifications:
• Each Par Can has 12x 1W LEDs rated at 50,000 hr. life
• 25-degree beam angle
• Power Consumption: 70W max total system (120V)
• Power plug and chase controller power input will vary depending on country or region
• Single par can dimensions (LxWxH): 7”x7”x8.75” / 180x180x220mm
T20F Features:
• 4-channel chase control pack (Four 3-prong Edison sockets)
• Great for the working Musician or DJ
• DMX, 3pin, XLR In/Out for linking to other T20F''''s
• 20 built-in programs: 10 normal chase programs and 10 chase programs with fade time
• 7 pre-set scenes (holding the “Stand By” button down for 3 seconds):
•Scene 1= Channel 1 On
•Scene 2= Channel 2 On
•Scene 3= Channel 3 On
•Scene 4= Channel 4 On
•Scene 5= Channel 1 and 3 On
•Scene 6= Channel 2 and 4 On
•Scene 7= All On
• Stand By function (Blackout)
• Chase button to select from the 20 built in chases
• Master/Slave and DMX operation modes
• Chase by way of Audio (sound activation) or 3, preset, chase speeds
• Max Load: 5A per channel or 15A max
• Circuit breaker protection
• Built-in, reversible, hanging/truss bracket
• Voltage: 120VAC / 60Hz or
T20FC “Foot Controller” Features:
• Chase selection foot switch
• Stand By (Blackout) foot switch
• Unit Dimensions: Inch:1x0.75x0.25 / 21x18x6.6mm
• Unit Weight: 1.68kgs / 4 lbs
|
